Products
|
|
|
| |
Antitermite and Antirodent Masterbatches
|
Maxirodent AR 3303®
Specification | MSDS |
EVA based Non-toxic, non-hazardous, halogen free, Anti-rodent masterbatches. Eco friendly grade. Suitable for HFFR wire cable, pipes and film application. |
Matermitan AT 3300®
Specification | MSDS |
EVA based Non-toxic, non-hazardous, halogen free, Anti-termite masterbatches. Eco friendly grade. Suitable for HFFR wire cable, pipes and film application. |
Maxicombi AR 3303®
/ AT 3300™
Specification | MSDS |
EVA based Non-toxic, non-hazardous, halogen free, Anti-rodent cum Anti-termite masterbatches. Eco friendly grade. Suitable for HFFR wire cable, pipes and film application where low dosage required particularly for crosslinking material. |
Maxirodent AR 3303® LS
Specification | MSDS |
EVA based Non-toxic, non-hazardous, halogen free, Anti-rodent masterbatches. Eco friendly grade. Suitable for HFFR wire cable, pipes and film application with enhance low smell. |
Matermitan AT 3300® LS
Specification | MSDS |
EVA based Non-toxic, non-hazardous, halogen free, Anti-termite masterbatches. Eco friendly grade. Suitable for HFFR wire cable, pipes and film application with enhance low smell. |
Maxicombi AR 3303® LS
/ AT 3300®
Specification | MSDS |
EVA based Non-toxic, non-hazardous, halogen free, Anti-rodent cum Anti-termite masterbatches. Eco friendly grade. Suitable for HFFR wire cable, pipes and film application where low dosage required particularly for crosslinking material with enhance low smell. |
|
| |
Engineering Plastic Compound
|
Nycolon A6L-12™ series
Specification Cable/
Specification Automotive
| MSDS |
Polyamide 12 widely used as anti-termite cable coating, technical flexible hoses, fuel line, pneumatic hoses, low modulus stress crack resistant , extrusion to molding available. |
Nycolon A6L-11™ series
Specification | MSDS |
Polyamide 11 widely used as anti-termite cable coating, technical flexible hoses, fuel line, consumer goods, oil and gas flexible pipes , sports equipment application. |
Nyflon A7L-PVDF™ series
Specification | MSDS |
PVDF is a specialty plastic material in the fluoropolymer family. Is an opaque, semi-crystalline, thermoplastic. It is used generally in applications requiring the highest purity, strength, and resistance to solvents, acids, bases and heat and low smoke generation during a fire event. Main application is for monofilament, molding, cable insulation application. |
Nybax –A8L-PEBA™ series
Specification | MSDS |
PEBA is a high performance thermoplastic elastomer. It is used to replace common elastomers – thermoplastic polyurethanes, polyester elastomers, and silicones - for these characteristics: lower density among TPE, superior mechanical and dynamic properties (flexibility, impact resistance, energy return, fatigue resistance) and keeping these properties at low temperature (lower than -40 °C), and good resistance against a wide range of chemicals. Application for sports equipment and high end shoe soles. |
Nypeek – PEEK series
Specification | MSDS |
PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. Excellent wear and abrasion resistant. Broad temperature range with excellet dimension stability. Application such as aerospace,electronic,energy , medical and industrial. |
Nyflex – TPEE
Specification | MSDS |
Polyester based TPE are high performance engineering materials that bridge the gap between cross-linked elastomers and rigid thermoplastics. They exhibit exceptional toughness, impact resistance, load bearing capacity, and low temperature flexibility.
Their creep resistance, flex fatigue resistance, and resilience make them suitable for dynamic applications. Chemical resistance to non-halogenated solvents, oils and greases is very good, even at elevated temperatures.
TPEE have the widest useful temperature range of all TPEs: From -55 to 140 |
|
| |
PTFE Powder - Specification
|
Overview Characteristics of PTFE MICROPOWDERS
|
PTFE MICROPOWDERS can be used as an additive to improve lubricant and tribological properties of thermoplastics, paints, coatings, greases, and inks.
The PTFE MICROPOWDERS concentration can be 1% to 20% and the best characteristics are: |
- Inert to all chemical solvent
- UV and weather resistant
- Excellent electrical insulator
- Enhance abrasion resistance
- Reduce friction coefficient and mechanical wear
- Reduce surface contamination
- Improved thermal stability
- Modify appearance
|
PTFE MICROPOWDER are divided into two categories:
|
 |
|
 |
| |
|
|
PTFE from Suspension Polimerization
|
|
PTFE from Dispersion Polimerization
|
| |
|
|
| Our production plant of Synergychem are new and allow the production of highest quality virgin PTFE MICROPOWDERS. FOOD CONTACT range are also available. |
|